When to replace a hot tub filter
By Tim Ruesch, Darlly Filtration. Updated October 2026.
A hot tub filter is due for replacement when cleaning no longer brings it back: the pleats stay flat, the media frays or tears, an end cap cracks, or the color stays after a deep clean.
That comes from the signs spa makers list, not from a date. This guide from Darlly Filtration shows what each maker says and how to find your replacement number.
How often should I replace my hot tub filter?
It depends on whose filter you ask about. Jacuzzi says every 12 to 24 months for typical pleated cartridges. Sundance Spas says 12 to 18 months for its microfilters under normal home use.
Caldera Spas says Watkins filters should last up to 3 years with regular cleaning. Treat those as a check date, then judge by condition.
Each maker writes for its own filters:
| Source | Replacement interval | Written for |
| Jacuzzi | 12 to 24 months, sooner if torn, flattened or heavily stained | Typical pleated cartridges |
| Sundance Spas | 12 to 18 months normal home use; 8 to 12 months heavy daily use; 18 to 24 months occasional use | Sundance microfilters |
| Caldera Spas | Designed to last 2 to 3 years; up to 3 years with regular cleaning | Watkins filters |
| Hydropool | "Every year or so" on one page; every 1 to 2 years on another | Hot tub filters in general |
The makers do not agree, and two disagree with themselves. Another Sundance Spas guide gives 6 to 12 months for heavy use and says to replace a filter older than 18 to 24 months
however it looks. Caldera Spas and Hydropool both say heavy use shortens filter life. Hydropool adds oils and lotions, unbalanced water and rough cleaning.
Picture two owners with the same cartridge, bought 14 months ago. One rinses weekly and
uses the tub on weekends. The other runs it nightly and rinses when the jets feel weak. Both are inside Jacuzzi's 12 to 24 month window. Only one has flat pleats. Check the filter in your hand, not the receipt.
What are the signs a hot tub filter is worn out?
Look at the pleats, the media and the end caps. Caldera Spas, Jacuzzi and Sundance Spas all list flat or collapsed pleats and cracked end caps or canisters. Caldera and Sundance add shredding fibers or torn pleats. Jacuzzi and Hydropool add an odor that will not go away, and Jacuzzi adds cloudy water even when the chemistry is balanced.
Jacuzzi and Sundance Spas also list filter error messages. Hot Spring lists wear on the rubber. Rule out a dirty filter first. Our guide on How to clean a hot tub filter covers the overnight soak. If the sign is still there after a full clean, replace it.
Does a discolored hot tub filter need replacing?
It can. Caldera Spas says to replace a Watkins filter that is brown, gray or green, or one that stays dark yellow after cleaning. Sundance Spas says a filter that turns permanently gray needs replacing. Hot Spring lists a discolored filter as a sign, and Jacuzzi says to replace sooner if the media is heavily stained.
The test is a deep clean. If the color holds after an overnight soak, the filter is done.
Should I replace both hot tub filters at once?
None of the spa maker pages we checked says you must. Caldera Spas says to replace a filter when it shows wear. Hydropool notes that some tubs use two filters of the same type and others use two different types, and it points owners to the manual or their retailer for care. Check each filter against the signs above.
Some spas take two cartridges, and some sets carry one number:
| Spa filter | Darlly # | Darlly cartridge | What to buy |
| Waterway front access skimmer cartridge (817-0050) | 60401 | 45 sq ft top load, 6" x 8-1/4" | Two per skimmer. 60416 is the longer-thread version |
| Sundance MicroClean set (6473-164 inner + 6473-165 outer) | 80802 | The set (Sundance 6541-397) | One number. Separately: PP1644 (inner), 80803 (outer) |
| Softub push-on #8553 / 5020 wide mouth (after 2009) | 60305 | 30 sq ft, 6" x 7-1/2", snaps on | One cartridge |
How do I find my replacement filter number?
Start with the old filter and read the label. Sundance Spas notes that filter size and part number
vary by spa model and year, so write those down too; the serial plate has them. Caldera Spas and Jacuzzi say to use filters designed for your spa model. If the number has worn off, measure the cartridge.
- Read the number on the cartridge. A spa maker, Unicel, Pleatco or Filbur number can all be crossed (How to cross-reference a pool filter cartridge). The Waterway 817-0050 cartridge crosses to Unicel 6CH-940, Pleatco PWW50, Filbur FC-0359 and Darlly 60401 (60416 for the longer thread).
- Note the year. It can change the part. Darlly 60305 fits the Softub push-on #8553 / 5020 wide mouth filter made after 2009. The off-set filter made before 2009 takes a different part.
- Count the cartridges. A Waterway front access skimmer takes two.
- Measure if the number is gone. Take the outside diameter, the overall length including end caps but not handles, and the inside diameter of any open end. Note whether there is a center core, and count the pleats. Our guide on How to measure a pool filter cartridge walks through each one; they work on spa cartridges too.
Brand names belong to their owners. Darlly is not affiliated with them.
Darlly's pleated spa cartridges are built to the spec of the original cartridge, with tri-lobal spun bonded polyester media that resists chlorine and bromine.
Is blue filter media available for hot tub filters?
Yes. Blue media is for spa cartridges: any spa cartridge can be ordered in blue by adding M to the part number. Darlly does not make pool filters in blue media. So the Softub replacement 60305 in blue is 60305M, and the Waterway skimmer cartridge 60401 in blue is 60401M.
Frequently asked questions
How long does a hot tub filter last?
It depends on the filter. Jacuzzi says 12 to 24 months for typical pleated cartridges, Sundance Spas says 12 to 18 months for its microfilters in normal home use, and Caldera Spas says up to 3 years for Watkins filters.
Can I keep cleaning a filter instead of replacing it?
Only while cleaning still works. If flat pleats, torn media, cracked end caps or lasting color remain after a full soak, replace it. Darlly's melt-blown cartridges are disposable. They are not meant to be cleaned; replace them.
How many filters does a Waterway front access skimmer take?
Two. Darlly 60401 replaces the Waterway 817-0050 cartridge, and 60416 is the longer-thread version.
What replaces a Sundance MicroClean filter set?
Darlly 80802 is the set: the 6473-164 inner and the 6473-165 outer. If you need only one piece,
PP1644 is the inner and 80803 is the outer.
Can I get blue media on a pool filter?
No. Blue media is available on spa cartridges only. Darlly does not make pool filters in blue media.
Find your replacement filter
Ask your local pool or spa store for Darlly. Not sure who carries it? Contact Darlly. See the Darlly product pages: 60401, 60305, 80802.